Remove/install steering wheel

AR46.10-D-0100E

Remove/install steering wheel

23.07.2019

Model

900, 906

1

Screw

2

Clock spring contact

3

Safety clip

 

Remove/install

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove airbag unit from steering wheel

AR91.60-D-0660C

2

Turn the steering wheel into the center position and allow the steering wheel lock to engage

 Wheels must be in straight-ahead position.

3

Remove screw (1)

 Installation: Replace bolt (1).

 Bolt, steering wheel to steering shaft

*BA46.10-N-1008-05C

4

Detach steering wheel from the steering column

5

Secure clock spring contact (2) against twisting with adhesive strip or if present with securing clamp (3)

 The steering wheel must be in the straight-ahead position. Insert the securing clamp (3) into the opening provided for this (arrow).

6

Install in the reverse order

7

Perform road test to check the position of the steering wheel

 Steering wheel, steering column tube, steering shaft

Number

Designation

Model 900

Model 906

BA46.10-N-1008-05C

Bolt, steering wheel to steering shaft

Nm

80

80