AR46.10-D-0100D | Removing and installing steering wheel | 17.10.11 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (SA5) Driver airbag
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 690.6 with CODE (SA5) Driver airbag
D46.10-1103-01
1 Steering wheel
2 Bolt
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag unit with deployment face up, do not subject to temperatures above | |
| Notes on disposing of airbag and emergency tensioning retractor units | ||
1 | Disconnect ground cable from battery | ||
2 | Remove airbag unit from steering wheel | ||
3 | Turn steering wheel (1) into middle position and lock steering wheel lock | Wheels must be in straight-ahead position. | |
4 | Unscrew screw (2). | Installation: Use new bolt. | |
| |||
5 | Pull steering wheel (1) off steering column | ||
6 | Install in the reverse order | ||
7 | Set time on instrument cluster | Except code J19/J05, tachograph. | |
8 | Set time on timer for auxiliary heater | With code H12, Warm water auxiliary heater or H86, Timer for auxiliary heater. | |
9 | Code radio | ||
10 | Perform road test to check the position of the steering wheel |
Steering wheel, jacket tube, steering shaft
Number | Designation | Model | Model | ||
BA46.10-N-1004-05C | Screw for steering wheel with airbag on steering shaft | Nm | 80 | 70 | |
Steering wheel, jacket tube, steering shaft
Referenced documents
- ar9160d0660b Remove/install airbag unit on steering wheel
- as9100z000101a Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.
- os9100p000101a Notes on disposing of airbag and emergency tensioning retractor units