ar4610b7300a

Remove/install steering shaft

Type ar · topic 46.10 · version 0100 · 2016-02-12

Applies to: Vehicle 979.0 with Body 979.811

Where it sits

Function group 2 Chassis › 46 Steering › 46.10 Steering wheel, jacket tube, steering shaft, steering lock — Series 979 (models 0**, 811)

EinPAS 22 Steering › 22.15 Power steering › 22.15.40 Steering wheel/steering column/steering column tube/steering lock — Series 979 (models 0**, 811)

AR46.10-B-7300A

Remove/install steering shaft

12.02.16

Vehicle 979.0 with Body 979.811

Remove/install steering shaft

B46.10-0007-06

11 Torx bolts

12 Torx bolts

13 Top paneling

14 Central paneling

15 Screw

16 Electric cables

17 Bottom paneling

18 Torx bolts

19 Torx bolts

20 Steering axle

Remove and install

Take care not to damage cabin internal paneling and panel

1

Disconnect battery negative cable or turn off vehicle general key

2

Put the front wheels in driving position in straight line

The steering wheel should also be aligned and centralized in the driving position and straight line.

3

Remove the steering wheel

AR46.10-B-0100D

4

Remove the Torx screws (11) and (12) and remove the upper (13) and central (14) paneling from the steering column

5

Remove the screw (15) from the steering columns connector and disconnect the electrical cables (16)

6

Remove the driver carpet, remove the Torx screws (18) from the steering columns lower paneling (17)

7

Remove the Torx screws (19)

8

Remove the steering axle (20)

Install: The steering wheel must also be aligned and centralized in the driving position and straight line.

9

Install in the reverse order

Referenced documents