ar4305d132002d
Detach/attach drive gear on vacuum pump
Type ar · topic 43.05 · version 0104 · 2010-01-28
Applies to: MODEL 668, 670 with ENGINE 904.908 /914 /923 /936 MODEL 670 with ENGINE 904.904
Where it sits
Function group 2 Chassis › 43 Brakes - pneumatic system and auxiliary brakes › 43.05 Vacuum pump — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)
EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.50 Vacuum pump/compressed-air reservoir — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)
AR43.05-D-1320-02D
| Detach/attach drive gear on vacuum pump
|
|
|
Number
| Designation
| Model
668, 670
with engine 904.908/
923
|
|
|
|
|
|
|
|
|
|
|
BA43.05-N-1004-01B
| Drive gear to vacuum pump
| Nm
| 200
|
1 Install blocking device (5) for holding the drive gear (3) to the vacuum pump (1) by means of bolts (5a).
2 Loosen nut (4) on crankshaft of vacuum pump (1).
3 Attach puller (6) and pull off drive gear (3) then unscrew nut (4).
Installation: Observe tightening torque of nut (4).
