Brakes, pneumatic system
Number | Designation | Model 684.482 | ||
BA42.60-N-1002-04A | Bolt, top section of housing to valve housing | Nm | 8 | |
BA42.60-N-1003-04A | Bolt, bottom section of housing to valve housing | Nm | 8 | |
I42.60-0063-01
1 Fit springs (8) on valves (9) and install in valve housing.
I42.60-0057-01
2 Fit diaphragm (7) on valve housing.
Ensure that it is correctly aligned.
I42.60-0056-01
3 Install springs (6) and spring guide (5).
I42.60-0055-01
4 Fit top section of housing (4) on valve housing.
Observe markings.
I42.60-0054-01
5 Fit and tighten bolts (3).
Observe tightening pattern (I - V).
I42.60-0011-01
I42.60-0053-01
6 Screw adjusting screws (2) into top section of housing.
Number of turns: Refer to noted values.
I42.60-0052-01
7 Insert dust caps (1).
I42.60-0061-01
8 Fit springs (13) on valves (14) and install in valve housing.
I42.60-0060-01
9 Position gasket (12) and cover (11) on valve housing.
I42.60-0059-01
10 Screw in bolts (10).