ar4245w2000h

Remove/install electronic Stability Program (ESP) control unit

Type ar · topic 42.45 · version 0202 · 2020-06-26

Applies to: Model 963, 964 with code S1D (Stability Control Assist (ESP))

Where it sits

Function group 2 Chassis › 42 Brakes - hydraulic and mechanical systems › 42.45 Electronic Stability Program (ESP), stability control (SR) — Series 963 · Series 964

EinPAS 26 Active safety system › 26.20 Braking/traction control › 26.20.11 Control unit/relay — Series 963 · Series 964

AR42.45-W-2000H

Remove/install electronic Stability Program (ESP) control unit

18.06.2020

Model

963, 964

with code S1D (Stability Control Assist (ESP))

Remove/install electronic Stability Program (ESP) control unit

Wabco version

1

Electrical connector

A25

Electronic Stability Program (ESP®) control unit

W42.45-1058-11

Remove/install electronic Stability Program (ESP) control unit

Knorr version

1

Electrical connector

A25a

Electronic Stability Program (ESP®) control unit

W42.45-1024-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Switch off ignition.

2

Remove electrical connector (1) from Electronic Stability Program (ESP®) control unit (A25, A25a).

3

Remove Electronic Stability Program (ESP®) control unit (A25, A25a) from crossmember or holder.

Bolt, Electronic Stability Program (ESP®) control unit to crossmember or bracket

*BA42.45-N-1001-01C

4

Install in the reverse order.

5

Teach-in Electronic Stability Program (ESP®) control unit (A25, A25a).

Only if the Electronic Stability Program (ESP®) control unit (A25, A25a) has been replaced.

AR42.45-W-2000-01H

Electronic Stability Program (ESP®)

Number

Designation

MODEL 963, 964

BA42.45-N-1001-01C

Bolt, Electronic Stability Program (ESP®) control unit to crossmember or bracket

Nm

15

Referenced documents