ar4110s005019e

Remove/install propeller shaft intermediate bearing

Type ar · topic 41.10 · version 0101 · 2019-06-29

Applies to: Model 447 with engine 274, 651, 654 Model 448 with engine 274

Where it sits

Function group 2 Chassis › 41 Propeller shaft › 41.10 Propeller shaft — Series 447 · Series 448 · Series 651 · Series 654

EinPAS 17 Drivetrain/axle › 17.40 Propeller shaft › 17.40.30 Drive/all-wheel drive propeller shaft — Series 447 · Series 448 · Series 651 · Series 654

Also applies to engines/gearboxes: 274 ***

AR41.10-S-0050-19E

Remove/install propeller shaft intermediate bearing

Model

447 with engine 274, 651, 654

Model

448 with engine 274

Remove/install propeller shaft intermediate bearing
Remove/install propeller shaft intermediate bearing
Remove/install propeller shaft intermediate bearing

000 589 88 33 00

Puller, two-arm

126 589 03 15 00

Drift

129 589 00 34 00

Puller arms

Remove/install propeller shaft intermediate bearing

S41.10-A004-06

Remove/install propeller shaft intermediate bearing

Remove

1

Clamp propeller shaft piece by joint fork, with propeller shaft intermediate bearing (6) upward, in vise.


Use soft vise jaws.



2

Detach propeller shaft intermediate bearing (6).


To do so, position puller with puller arms on protective ring (7), as shown.
Pull off protective rings (5, 7) together with propeller shaft intermediate bearing (6).
Dispose of protective rings (5, 7) and propeller shaft intermediate bearing (6).


S41.10-A003-05

Remove/install propeller shaft intermediate bearing

S41.10-A004-06

Remove/install propeller shaft intermediate bearing
Remove/install propeller shaft intermediate bearing
Remove/install propeller shaft intermediate bearing

D41.10-1125-01

D41.10-1126-01

D41.10-1127-01

Install

3

Install new protective ring (7) using drift.

Protective rings (5, 7) are different. Observe installation position of protective ring (7).
Otherwise, malfunctions, noise and damage can occur.

4

Install new propeller shaft intermediate bearing (6) using drift.

Observe the installation position of the propeller shaft intermediate bearing (6). The collar (arrow A) points away from the joint fork.
Otherwise, malfunctions, noise and damage can occur.

Drive on propeller shaft intermediate bearing (6) only up to end stop.
Otherwise, malfunctions, noise and damage can occur.

For this, drive on propeller shaft intermediate bearing (6) completely.

5

Install protective ring (5) of propeller shaft intermediate bearing (6) using drift.

Protective rings (5, 7) are different. Observe installation position of protective ring (5).
Otherwise, malfunctions, noise and damage can occur.

Drive on protective ring (5) only up to end stop.
Otherwise, malfunctions, noise and damage can occur.

6

Remove propeller shaft piece from vise.