ar4110p008508rt

Measure absolute angle of front propeller shaft

Type ar · topic 41.10 · version 0100 · 2006-07-26

Applies to: MODEL 251

Where it sits

Function group 2 Chassis › 41 Propeller shaft › 41.10 Propeller shaft — Series 251

EinPAS 17 Drivetrain/axle › 17.40 Propeller shaft › 17.40.30 Drive/all-wheel drive propeller shaft — Series 251

AR41.10-P-0085-08RT

Measure absolute angle of front propeller shaft

Data Sheet for Measuring Inclination Angle, Form

OF41.10-P-3000-01B

Workshop equipment

WE58.40-Z-1002-15A

Electronic clinometer

WE58.40-Z-1003-15A

Electronic propeller shaft inclinometer

WE58.40-Z-1004-15A

Electronic combination measuring instrument

Measure absolute angle of front propeller shaft

P41.10-2269-09

2 Absolute angle of front propeller shaft

Measure absolute angle of front propeller shaft

P41.10-2288-09

Measurement of absolute angle 2 of front propeller shaft

086a Sensor

2 Front driveshaft

1 Mount the sensor (086a) directly on the front propeller shaft (2) and align with the horizontal.

The cable must point in the direction of travel (arrow), otherwise an incorrect measurement will occur.

If the position of the sensor (086a) deviates too much from the horizontal, a fault message appears on the measuring instrument display, no value can be read off or stored.

2.1 Read off absolute angle of the front propeller shaft (2) on the measuring instrument display and enter in the data sheet.

If the electronic inclinometer is used or if measurements are made in inclination measuring mode with the electronic articulation/propeller shaft inclinometer

-----------------------------------------------------------------------------------------

The X-value must be read off on the display. Otherwise incorrect measurement results occur.

The measured value must not be stored.

The absolute angle of the front propeller shaft (2) may only be read off if the sensor (086a) is on standby and the displayed value is constant.

2.2 Store the absolute angle of the front propeller shaft (2) in the measuring instrument.

If the electronic propeller shaft inclinometer with memory extension or the electronic articulation/propeller shaft inclinometer with memory extension is used in articulation angle measuring mode .

-----------------------------------------------------------------------------------------

Save the measured value by pressing the SAVE button. After this the measurement readiness for the third angle is displayed.

The absolute angle of the front propeller shaft (2) may only be stored if the sensor (086a) is on standby and the displayed value is constant.

Referenced documents