41 | Programmed repair | ||
41 | Technical modifications | ||
41-050 | Remove and install propellor shaft | D. Model 124 E. Model 126 | |
F. Model 201 | |||
41-060 | Remove and install front axle propellor shaft | Model 4MATIC | |
41-080 | Balance rear propellor shaft on vehicle | Model 124 | |
41-085 | Measure propellor shaft alignment with mechanical propellor shaft articulated angle measuring instrument | Models 124, 201 | |
41-100 | Remove and install propellor shaft intermediate bearing and replace deep-groove ball bearing | A. Models 107, 114, 115, 116, 123 B. Model 126 C. Models 124, 201 | |
41-200 | Replace centering sleeve | A. Models 114, 115, 116, 123 as well as models 107 and 126 up to 08/85 B. Models 107 and 126 as of 09/85 C. Models 124, 201 |
Referenced documents
- ra41001070060x 0060 - Removal and installation of the propeller shaft front axle Model 124 4MATIC
- ra41001070080x 0080 - Balancing the rear propeller shaft Model 124
- ra41001070085x 0085 - Measurement of propeller shaft alignment with mechanical propeller shaft articulation angle meter Model 124, 201
- ra41001070100x 0100 - Remove and install propeller shaft intermediate bearing, and replace grooved ball bearing A. Model 107, 114, 115, 116, 123, B. Model 126, C. Model 124, 201
- ra41001070200x 0200 - Renewing the centering sleeve A. Model 114, 115, 116, 123 and 107, 126 to 08/85, B. Model 107, 126 from 09/85, C. Model 124, 201
- ra4100107b050x 0050 - Removal and installation of the propeller shaft D. Model 124, E. Model 126
- ra4100107c050x 0050 - Removal and installation of the propeller shaft F. Model 201
- ra4100107pr00x Programmed repair: Propeller shaft Models 107, 114, 115, 116, 123, 124, 126, 201
- ra4100107ta00x Technical modifications: Propeller shaft Models 107, 114, 115, 116, 123, 124, 126, 201