Measuring rear axle carrier (when removed)

AR40.30-P-0410RT

Measuring rear axle carrier (when removed)

12.1.10



Measure



The rear axle carrier (7) can be measured with or without the axle and drive components

1

Set up Celette straightening bench module members

 See additional Celette setup schedule.

AR60.10-P-1060RT

2

Mount Celette module MZ140 (1) with test fixtures 30 and 31 (2) on Celette straightening bench

 See additional Celette setup schedule.

AR60.10-P-1060RT

3

Insert M141.5170 hexagon bolt (3) in test fixtures 30 and 31 (2)

4

Mount Celette module MZ200 (4) with test fixtures 35 and 36 (5) on Celette straightening bench

 See additional Celette setup schedule.

AR60.10-P-1060RT

5

Mount test inserts 37 (6) into test fixtures 35 and 36 (5)

6

Place rear axle carrier (7) onto test fixtures 30 and 31 (2) and onto test inserts 37 (6)

 If the rear axle carrier (7) cannot be positioned without excessive force it must be replaced.

7

Check dimension between contact surfaces of rear axle carrier (7) and attendant text fixtures (dimension a)

 The rear axle carrier (7) may fail to make contact with one jacking point only. If the permissible dimension (dimension a) is overstepped there, the rear axle carrier (7) must be replaced.

*BE40.30-P-1001-07C

 Feeler gauges (20-piece)

*003589002300

8

Remove rear axle carrier (7), strip down straightening bench

Number

Designation

Model 251

BE40.30-P-1001-07C

Maximum distance between contact surfaces of rear axle carrier and test fixture

mm

2.5