Check and adjust camber and caster at front axle · ar4020l0322va · Mercedes-Benz WIS

AR40.20-L-0322VA

Check and adjust camber and caster at front axle

19.9.11

MODEL 414.700

P40.20-0336-06

Camber

ST + = positive camber

ST  = negative camber

1 Suspension strut

1c Bolts

	Check
1	Observe general information on chassis alignment		AR40.20-P-0201GC
2	Check vehicle level at the front and rear axle with electronic inclinometer and adjust if necessary		AR40.20-L-0301VA
3	Check camber, assign tabular value		AR40.20-L-0322-02VA
4	Check caster, assign tabular value		AR40.20-L-0322-03VA
	Adjusting
5	Adjust camber		*BE40.20-P-1001-06A
			*BA32.25-P-1003-04A
6	Adjusting caster	 as of VIN 211 229	*BE40.20-P-1002-06A
			*BA33.15-P-1002-01B
7	Check the vehicle level at the front axle again after adjusting the camber and caster	 The vehicle level must agree with the values determined on the initial measurement.
8	Adjust front axle toe-in		AR40.20-L-0323VA

Inspection and setting data of front axle camber/caster

 Struts

Number	Designation		Model 414


BA32.25-P-1003-04A	Nut, suspension strut to steering knuckle	Nm	190

 Longitudinal member, control arm

Number	Designation			Model 414


BA33.15-P-1002-01B	Self-locking nut, flange joint on wishbone	Stage 1	Nm	45
		Stage 2	°	60

ar4020l0301va Check vehicle level at front and rear axle with electronic inclination meter and adjust, if necessary
ar4020l032202va Check camber, assign tabular value
ar4020l032203va Check caster, match with a value in the table
ar4020l0323va Check and adjust front toe angle
ar4020p0201gc General information on chassis alignment check