ar4015p0300rt

Remove/install TPM [RDK] antenna

Type ar · topic 40.15 · version 0101 · 2009-09-01

Applies to: MODEL 251 up to Model Year 2009 with CODE (470) Tire pressure monitor (base) with CODE (475) Tire pressure monitor (Siemens) with CODE (477) Tire pressure loss warning

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.15 Tire pressure/tire pressure monitoring — Series 251

EinPAS 26 Active safety system › 26.29 Tire pressure loss detection system/tire pressure control › 26.29.14 Transmitter/receiver — Series 251

AR40.15-P-0300RT

Remove/install TPM [RDK] antenna

27.8.09

MODEL 251
up to Model Year 2009
with CODE (470) Tire pressure monitor (base)
with CODE (475) Tire pressure monitor (Siemens)
with CODE (477) Tire pressure loss warning

Remove/install TPM [RDK] antenna

P40.15-2281-04

1 Nut

2 Nut

3 Electrical connector

A2/97 Central TPM [RDK] antenna

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Switch off ignition

2

Raise vehicle with lifting platform

AR00.60-P-1000RT

3

Loosen underfloor paneling on right until central TPM [RDK] antenna (A2/97) becomes accessible

AR61.30-P-1001RT

4

Separate electrical plug connection (3)

5

Remove nuts (1, 2)

6

Remove central TPM [RDK] antenna (A2/97)

7

Install in the reverse order

Referenced documents