ar4015d0101m

Remove/install tire pressure monitoring control unit

Type ar · topic 40.15 · version 0100 · 2016-05-21

Applies to: Model 906 with code XM0 (Facelift)

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.15 Tire pressure/tire pressure monitoring — Series 906

EinPAS 26 Active safety system › 26.29 Tire pressure loss detection system/tire pressure control › 26.29.11 Control unit/relay — Series 906

AR40.15-D-0101M

Remove/install tire pressure monitoring control unit

17.05.2016

Model

906

with code XM0 (Facelift)

Remove/install tire pressure monitoring control unit

D40.15-0028-09

1

Control unit

3

Mounting clip

2

Electrical connector

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Perform initial startup of control unit (1)

If control unit (1) is replaced.

AD00.00-D-2000-04SD

Installation: Transfer the temporarily stored data to the control unit (1).

2

Remove the transmitter key from electronic ignition lock (EZS) control unit

3

Disconnect electrical connection (2)

4

Loosen retaining clips (3) and remove control unit (1)

5

Install in the reverse order

Referenced documents