Remove/install wheels · ar4010y1100ind · Mercedes-Benz WIS

AR40.10-Y-1100IND

Remove/install wheels

15.05.2020

Model

831.001/002/005

Front tyres removal and installation procedure

3	Jack
4	Front wheel nuts
5	Front tyre

Y40.10-0048-06

Rear tyres removal and installation procedure

1	Rear outer tyre
2	Rear inner tyre
3	Jack
6	Rear wheel nuts

Y40.10-0049-06

Tyre rotation procedure - Front axle

A	Vehicle front
LH	Tyre (left hand side)
RH	Tyre (right hand side)

Y40.10-0046-06

Tyre rotation procedure - Rear axle

A	Vehicle front
LH	Tyre (left hand side)
RH	Tyre (right hand side)
LI	Inner tyre-left
LO	Outer tyre-left
RI	Right inner tyre
RO	Right outer tyre

Y40.10-0047-06

 Danger	Risk of death caused by vehicle slipping or toppling off during lifting	Only lift vehicle at the lift support points specified by the vehicle manufacturer.	AS00.00-Z-0032-01A
	Front tyre removal and installation procedure
1	Loosen wheel nuts (4) by 3 to 4 turns.	 Place jack under the front axle.
		 Installation: Ensure that the nuts must be tightened in a diagonally opposite pattern. All the nuts must be closely tightened in equal manner.
		 Front wheel nut	*BA40.10-Y-1001-01C
2	Pump jack (3) until it supports front axle and tyre lifting off the ground.	 Completely loosen the nuts after lifting.
		 Installation: Relieve load from the jack and remove it.
3	Remove tyre (5) from the vehicle carefully.
4	Install in the reverse order.
	Rear tyre removal and installation procedure
5	Place jack under the differential housing and lift the jack until it touches the axle.	 Ensure that the jack is in contact with the axle.
		 Installation: Relieve load from the jack and remove it.
6	Loosen the wheel nuts by 3 to 4 turns.	 Pump the jack to lift the tyre off the ground.
		 Installation: Ensure that the nuts must be tightened in a diagonally opposite pattern and an equal manner.
		 Rear wheel nut	*BA40.10-Y-1002-01C
7	Remove wheel nuts and remove the outer tyre (1) followed by the inner tyre (2).	 Installation: Insert two nuts opposite same and hand tighten the nuts.
8	Install in the reverse order.
	Check
9	Check the wheels.
			AP40.20-Y-4055B
10	Checking condition of rim.		AR40.10-Y-1010-01A
11	Check wheel rim face out.		AR40.10-Y-0003-01A
12	Check wheel rim run-out.		AR40.10-Y-0004-02A
13	Check wheel rim lateral / axial run-out (Wobble).		AR40.10-Y-1025-03B
14	Check wheel rim radial run-out (Lift).		AR40.10-Y-1025-02A
15	Guidelines for checking runout (Offline).		AR40.10-Y-0005-03A

 Tyres

Number	Designation			Model 831.001/002/005
BA40.10-Y-1001-01C	Front wheel nut	Coarse M20 x 2.5	Nm	45010
		Fine M20 x 1.5	Nm	43030

 Tyres

Number	Designation			Model 831.001/002/005
BA40.10-Y-1002-01C	Rear wheel nut	Coarse M20 x 2.5	Nm	45010
		Fine M20 x 1.5	Nm	43030

Referenced documents

ap4020y4055b Check wheel adjustment values
ar4010y000301a Rim face out checking procedure
ar4010y000402a Wheel rim run out, checking procedure
ar4010y000503a Guidelines for checking runout
ar4010y101001a Checking condition of rim
ar4010y102502a Check tires for radial run-out
ar4010y102503b Checking rim for lateral runout
as0000z003201a Risk of death caused by vehicle slipping or toppling off during lifting