ar4010p1100ff

Remove/install wheels

Type ar · topic 40.10 · version 0202 · 2008-12-18

Applies to: MODEL 454.0

Where it sits

Function group 2 Chassis › 40 Wheels, chassis alignment check › 40.10 Wheels, tires — Series 454 (models 0**)

EinPAS 20 Chassis › 20.30 Wheel/tire › 20.30.30 Wheel/tire/spare wheel — Series 454 (models 0**)

AR40.10-P-1100FF

Remove/install wheels

12.12.08

MODEL 454.0

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle

2

Secure vehicle on vehicle lift

When work is continued on the vehicle such as, e.g. when supporting major assemblies using a jack (e.g. transmission jack) which exert an uneven load distribution,

as well as when removing the following components:

Front axle, front axle carrier, rear axle, engine or transmission.

AR00.60-P-0100MCC

3

Detach wheel cover

Only on vehicles with steel wheels.

4

Unscrew wheel nuts and remove wheels

In order to prevent damage, an impact wrench must not be used on light alloy rims.

*BA40.10-P-1001-01G

5

Check wheel contact surfaces for dirt and corrosion

Clean corroded surfaces with a wire brush or an emery cloth.

6

Install in the reverse order

7

Correct the tire inflation pressure in all wheels

In the event of tire pressure loss: Determine cause and replace tires if necessary.

Wheels

Number

Designation

Model
454.0

BA40.10-P-1001-01G

Wheel nut

Nm

120

Referenced documents