T35.50-0010-06
1 Brake line
2 Nut
3 Washer
4 Vibration damper
5 Bolt
6 Steering blocking device
7 Nut
8 Washer
9 Underlay
10 U-bolt
11 Connector
12 Compressed air line
| Remove/Install | ||
| Replace all bolts and nuts | ||
1 | Secure vehicle against rolling | ||
2 | Detach wheels from the leading axle | ||
3 | Detach brake lines (1) from the left and right diaphragm cylinder | ||
4 | Detach compressed-air line (12) and electrical connectors (11) from the steering blocking device (6) | ||
5 | Unscrew damper (4) from the leading axle | | |
6 | Secure the axle to prevent it falling | Use a jack or inspection pit lift. | |
7 | Detach spring U-bolt (10) | Installation: Pay attention to the correct position of the spring pads (9). | |
8 | Lower the axle and pull out under the vehicle | ||
9 | Install in the reverse order |
Leading axle
Referenced documents
- ar4010w1100a Remove/install wheels