ar3531p055002b

Removing tapered roller bearing outer races from rear axle housing

Type ar · topic 35.31 · version 0102 · 1998-10-27

Applies to: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.31 Rear axle center assembly — Series 124 (models 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Series 170 (models 435) · Series 201 (models 018, 023, 024, 122, 126) · Series 202 (models 018, 078, 120, 121, 122, 125, 180, 182) · Series 210 (models 003, 004)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 124 (models 020, 021, 080, 081, 104, 105, 106, 107, 120, 125, 126, 180, 185, 186) · Series 170 (models 435) · Series 201 (models 018, 023, 024, 122, 126) · Series 202 (models 018, 078, 120, 121, 122, 125, 180, 182) · Series 210 (models 003, 004)

AR35.31-P-0550-02B

Removing tapered roller bearing outer races from rear axle housing

Removing tapered roller bearing outer races from rear axle housing

201 589 01 15 00

Assembly mandrel

Removing tapered roller bearing outer races from rear axle housing

P35.31-0352-01

1 Plug in the assembly mandrel (046) for differential bevel gears on the left side and turn the complete differential clockwise until this abuts the rear axle housing.

2 Remove left and right tapered roller bearing outer race (11a).

Mark tapered roller bearing outer races.