Series
en
ar3531p055002a
Removing tapered roller bearing outer races from rear axle housing
Type ar · topic 35.31 · version 0111 · 2009-02-11
Applies to: Rear axle center assembly dia. 198 in MODEL 129.058 as of 1.6.94, 129.059, 129.063 as of 1.6.94, 129.064, 140.02 /03 as of 1.6.94, 170.465 /466, 202.033 /093 /133 /193, 208.365 /370 /465 /470, 210.006 /015 /017 /025 /045 /053 /055 /063 /065 /08 /206 /215 /217 /225 /245 /263 /265 /28 /606 /663, 220.063 /065 /067 /083 /084 /087 /165 /167 /183 /184 /187 Rear axle center assembly dia. 198 in MODEL 202.085 with TRANSMISSION 717 Rear axle center assembly dia. 198 in MODEL 202.134 /194, 210.007 with CODE
Where it sits
Function group 2 Chassis › 35 Rear axle › 35.31 Rear axle center assembly — Series 129 (models 058, 059, 063, 064) · Series 140 (models 02*, 03*) · Series 170 (models 465, 466) · Series 202 (models 033, 085, 093, 133, 134, 193, 194) · Series 208 (models 365, 370, 465, 470) · Series 210 (models 006, 007, 015, 017, 025, 045, 053, 055, 063, 065, 08*, 206, 215, 217, 225, 245, 263, 265, 28*, 606, 663) · Series 220 (models 063, 065, 067, 083, 084, 087, 165, 167, 183, 184, 187)
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 129 (models 058, 059, 063, 064) · Series 140 (models 02*, 03*) · Series 170 (models 465, 466) · Series 202 (models 033, 085, 093, 133, 134, 193, 194) · Series 208 (models 365, 370, 465, 470) · Series 210 (models 006, 007, 015, 017, 025, 045, 053, 055, 063, 065, 08*, 206, 215, 217, 225, 245, 263, 265, 28*, 606, 663) · Series 220 (models 063, 065, 067, 083, 084, 087, 165, 167, 183, 184, 187)
Also applies to engines/gearboxes: 717 ***
AR35.31-P-0550-02A
Removing tapered roller bearing outer races from rear axle housing
1 Insert assembly arbor (046) for differential pinions on right-hand side and press complete differential to the left until it touches the rear axle housing.
2 Remove left and right tapered roller bearing outer race (11a).
Mark tapered roller bearing outer races.
