ar3531p053003a

Checking, removal and installation of oil thrower on drive pinion

Type ar · topic 35.31 · version 0104 · 1999-03-11

Applies to: Rear axle center assembly dia. 210 in MODEL 129.067, 129.076 up to 31.1.98, 140.05 /07 Rear axle center assembly reinforced

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.31 Rear axle center assembly — Series 129 (models 067, 076) · Series 140 (models 05*, 07*)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 129 (models 067, 076) · Series 140 (models 05*, 07*)

AR35.31-P-0530-03A

Checking, removal and installation of oil thrower on drive pinion

140 589 02 15 00

Alignment tool

P35.31-0201-01

1 Check oil thrower (43c) for correct fit.

2 If it is a loose fit, replace oil the thrower and, if necessary, press onto the twelve-point collared nut using an alignment tool.