ar3531p052004gi

Detaching and attaching front rear axle center assembly suspension

Type ar · topic 35.31 · version 0103 · 2002-10-16

Applies to: MODEL 163.136 /154Rear axle center assembly dia. 210 MODEL 163.157 /113 /128 /172 /174 /175Rear axle center assembly dia. 210

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.31 Rear axle center assembly — Series 163 (models 113, 128, 136, 154, 157, 172, 174, 175)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 163 (models 113, 128, 136, 154, 157, 172, 174, 175)

AR35.31-P-0520-04GI

Detaching and attaching front rear axle center assembly suspension

Front rear axle center assembly suspension modified

BT35.31-P-0001-01GH

Rear axle carrier

Number

Designation

Model 163

BA35.10-P-1002-01C

Bolt, front rear axle center assembly suspension to rear axle carrier

Nm

165

BA35.10-P-1005-01C

Self-locking nut, fastening shackle of front rear axle center assembly suspension to bracket

M12

Nm

30

Detaching and attaching front rear axle center assembly suspension

P35.31-2024-11

Detaching

1 Unscrew nut from fastening shackle (51n).

2 Remove bolt (51l) with nut (51m).

Fitting

Replace self-locking nuts.

3 Fit fastening shackle (51n) and bolt (51l) with nut (51m).

4 Fit nut on fastening shackle (51n) tight.

5 Tighten bolt (51l) to the specified tightening torque.

6 Tighten nut on fastening shackle (51n) to the specified tightening torque.

Referenced documents