ar3530d4670s

Remove/install radial seal at drive pinion gear

Type ar · topic 35.30 · version 0102 · 2018-05-15

Applies to: Rear axle 741.421/422/423/453/454/455 in model 906 Rear axle 741.421/455 in model 900

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 900 · Series 906

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 900 · Series 906

Also applies to engines/gearboxes: 741 421, 741 422, 741 423, 741 453, 741 454, 741 455

AR35.30-D-4670S

Remove/install radial seal at drive pinion gear

09.05.2018

Rear axle	741.421/422/423/453/454/455 in model 906
Rear axle	741.421/455 in model 900

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Remove
1	Drain oil from rear axle differential
			AP35.00-D-3501A
2	Detach drive shaft from joint flange		AR41.10-D-0050H
3	Remove joint flange at drive pinion		AR35.30-D-4670-01S
		 Retainer wrench	*717589003100
		 Puller	*035589013300
4	Press out radial shaft sealing ring		AR35.31-D-0530-06S
	Install
5	Press in radial shaft sealing ring		AR35.31-D-0530-06S
		 Drift	*741589021500
6	Install joint flange at drive pinion		AR35.30-D-4670-03S
		 Nut, joint flange to drive pinion	*BA35.30-N-1005-01A
		 Retainer wrench	*717589003100
7	Secure collared nut		AR35.30-D-4670-04S
8	Mount drive shaft onto joint flange		AR41.10-D-0050H
9	Add oil to rear axle differential
			AP35.00-D-3501A

 Rear axle shaft

Number	Designation		Rear axle 741.421/423	Rear axle 741.422/453/454/455/456
BA35.30-N-1005-01A	Nut, joint flange to drive pinion		200	200

Remove/install radial seal at drive pinion gear

Remove/install radial seal at drive pinion gear

Remove/install radial seal at drive pinion gear

741 589 02 15 00

Drift

035 589 01 33 00

Puller

717 589 00 31 00

Retainer wrench

Referenced documents

ap3500d3501a Rear axle - oil change
ar3530d467001s Remove joint flange at drive pinion
ar3530d467003s Install joint flange at drive pinion
ar3530d467004s Secure collar nut on joint flange drive pinion
ar3531d053006s Pressing out and pressing in radial sealing ring at drive pinion
ar4110d0050h Remove/install propeller shaft
as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.