ar3530d467004a

Secure collar nut on joint flange drive pinion

Type ar · topic 35.30 · version 0209 · 2011-07-13

Applies to: REAR AXLE 741.130 /131 /40 /412 /413 /414 /415 /416 /420 /428 /429 /43 /52 /530 /540 /55, 742.5 REAR AXLE 741.417 in MODEL 906.132 /134 /136 REAR AXLE 741.130 in MODEL 690.6 REAR AXLE 741.408 /409 in MODEL 690.6

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 690 (models 6**) · Series 906 (models 132, 134, 136)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.51 Axle shaft/drive shaft — Series 690 (models 6**) · Series 906 (models 132, 134, 136)

Also applies to engines/gearboxes: 741 130, 741 131, 741 40*, 741 408, 741 409, 741 412, 741 413, 741 414, 741 415, 741 416, 741 417, 741 420, 741 428, 741 429, 741 43*, 741 52*, 741 530, 741 540, 741 55*, 742 5**

AR35.30-D-4670-04A

Secure collar nut on joint flange drive pinion

Secure collar nut on joint flange drive pinion

D35.25-0001-01

1 Axially shear off the locking collar of the collar nut which has been screwed on in the area of the locking groove so that the locking tabs abut the flank of the groove after being bent into the groove.