ar3530d044004a

Replacing cylinder roller bearing in axle housing

Type ar · topic 35.30 · version 0101 · 1998-06-05

Applies to: REAR AXLE 742.5 /4

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.50 Housing/supporting tube/bridge/carrier/torque tube

Also applies to engines/gearboxes: 742 4**, 742 5**

AR35.30-D-0440-04A

Replacing cylinder roller bearing in axle housing

Replacing cylinder roller bearing in axle housing
Replacing cylinder roller bearing in axle housing

D35.30-0114-01

1 Turn wire snap ring (1) in direction of arrow and remove.

2 Drive out cylindrical roller bearing (2) using a suitable drift punch.

D35.30-0115-01

Replacing cylinder roller bearing in axle housing
Replacing cylinder roller bearing in axle housing

D35.30-0116-01

3 Using a suitable drift punch, drive in new cylindrical roller bearing (2) so that the grooves in the cylindrical roller bearing and axle housing (3) align (arrow).

4 Install wire snap ring (1).

D35.30-0117-01