Remove/install through-drive shaft

AR35.30-B-0491A

Remove/install through-drive shaft

04.08.2020

Rear axle

740.6 in model 386, 693, 696

Rear axle

740.6 in model 695

Rear axle

740.8 in model 696, 934, 938, 958

Modification notes

17.07.2019

Anel roscado na árvore acionadora traseira

BA35.30-B-1004-04A

1

Threaded ring

2

Rear actuating shaft

3

Bolt

4

Lock plate

5

Claw type wrench

6

De-multiplication wrench

 

Remove/install

1

Loosen and remove the screw (3) and the locking plate (4)

2

Remove the threaded ring (1) using the claw wrench and the demultiplier wrench

 Installation: Clean the threads of the threaded ring, apply sealant to the threads and tighten the threaded ring to the specified tightening torque.

   Threaded ring on rear drive shaft

*BA35.30-B-1004-04A

Terolan 307/II, Dichtin 51, epple 22 sealant

*BR00.45-Z-1018-01A

  
Torque multiplier

*000589021300

  
Assembly wrench

*740589006300

3

Remove the rear actuating shaft (2) by slightly tapping with a plastic hammer

 Installation: Mount new seals on the threaded ring (1) and lubricate the lips of the seals. Be careful not to damage the seals during installation.

Grease, DB supply specification 6804 - Class 267.0

*BR00.45-Z-1107-06A

4

Install in reverse order

 Longitudinal differential

Number

Designation

Axles 740.800, 740.804, 740,835, 740.899

BA35.30-B-1004-04A

Threaded ring on rear drive shaft

M 112

Nm

1000

Repair materials

Number

Designation

Order number

BR00.45-Z-1018-01A

Terolan 307/II, Dichtin 51, epple 22 sealant

Use corresponding commercially available repair materials.

BR00.45-Z-1107-06A

Grease, DB supply specification 6804 - Class 267.0

Use corresponding commercially available repair materials.