1 | Sprocket |
2 | Differential box |
3 | Crosswise pins |
4 | Satellite gear |
5 | Spherical washer |
6 | Planetary gear |
7 | Crosswise pin |
8 | Thrust washers |
T35.31-0032-11
2 | Differential box |
3 | Crosswise pins |
4 | Satellite gear |
7 | Crosswise pin |
T35.31-0033-11
Unmount and mount | |||
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
1 | Disassembling the crown wheel with the differential | ||
Lifting device | |||
2 | Remove the ring gear (1) from the differential case (2) | ||
3 | Remove the crosswise pins (3, 7) | Using a screwdriver, push the pins (3, 7) out of the differential case (2), being careful not to damage the housing. | |
4 | Remove the satellite gears (4) with the spherical washers (5) | ||
5 | Disassemble the planetary gear (6) and the thrust washer (8) from the differential housing (2) and from the ring gear (1) | Disassemble with appropriate tool to avoid damaging the thrust washers (8). | |
| Check | ||
6 | Check the parts for damages and wear | Replace the damaged and worn parts. | |
7 | Carry out assembly of the differential in reverse order | ||
8 | Assemble the bevel gear with the differential | ||
Lifting device |
055 589 16 59 00
Lifting device
Referenced documents
- ar3530b0464h Remove/install crown wheel with differential
- ar3530b430004ga Remove/install ring gear on differential housing
- as0000z001701a Risk of injury caused by scraping or cutting body parts on sharp vehicle parts