ar3530b045805a
Preparing drive pinion for installation
Type ar · topic 35.30 · version 0100 · 2016-02-12
Applies to:
Where it sits
Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 382 (models 171, 175, 176, 177, 180, 181, 184, 185, 186, 188, 189) · Series 634 (models 001, 011, 061, 081) · Series 688 (models 272, 276, 277)
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Series 382 (models 171, 175, 176, 177, 180, 181, 184, 185, 186, 188, 189) · Series 634 (models 001, 011, 061, 081) · Series 688 (models 272, 276, 277)
Also applies to engines/gearboxes: 743 ***, 743 498, 746 ***, 746 973, 746 974
AR35.30-B-0458-05A
| Preparing drive pinion for installation
|
|
|
Screw two bolts into the coupling flange, securing the threaded ring against the outer bearing cap.
1 Bolts
2 Coupling flange
3 Threaded ring
4 Fastening clamp
