354 589 01 21 00
Testing unit
Pulling device
745 589 00 33 00
D35.30-0121-01
1 Place a clamp (16) around the outer races of the tapered roller bearing and clamp in the vise.
2 Fasten the puller (17) to the drive flange (9) with 2 bolts (18) so that the bolts (18) press onto the threaded ring (10) with approx. 30 Nm and the puller (17) lies flat on the drive flange (9).
The outer races of the tapered roller bearings are under stress axially as a result and the shim halves cannot slip in the oil groove when the drive pinion is pulled out.
3 Remove clamp (16).