ar3530a044004a

Replacing cylindrical roller bearing in axle housing

Type ar · topic 35.30 · version 0101 · 2006-07-20

Applies to: REAR AXLE 745.800 in MODEL NAB372.124 /317

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 372 (models 124, 317)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.50 Housing/supporting tube/bridge/carrier/torque tube — Series 372 (models 124, 317)

Also applies to engines/gearboxes: 745 800

AR35.30-A-0440-04A

Replacing cylindrical roller bearing in axle housing

Drift

305 589 00 15 00

D35.30-0114-01

Remove

1 Turn wire ring (1) in direction of arrow and remove.

2 Drive out cylindrical roller bearing (2) using  drift.

D35.30-0115-01

D35.30-0116-01

Install

3 Drive in new cylindrical roller bearing (2) using drift so that the grooves in the cylindrical roller bearing and in the axle housing (3) are in alignment (arrow).

4 Install wire ring (1).

D35.30-0117-01