Removing and installing rear axle shaft flange and angular ball bearing · ar3520l0130va · Mercedes-Benz WIS

AR35.20-L-0130VA

Removing and installing rear axle shaft flange and angular ball bearing

5.9.00

MODEL 414.700

L35.20-0005-05

1 Trailing arm journal

2 Rear axle shaft flange

3 Collared nut

4 Locking ring

5 Hub cap

6 Angular ball bearing

023  Removal and installation tool

 	Removing, installing
1	Remove rear wheel
			AP40.10-P-4050Z
2	Remove rear axle brake disc		AR42.10-L-0240VA
3	Pull off hub cap (5)		*116589223300
4	Unscrew collared nut (3)	Installation: Replace and caulk collared nut.
			*BA35.30-P-1002-01B
5	Remove rear axle shaft flange (2)
6	Remove locking ring (4)	 Replace locking ring.
7	Remove angular ball bearing (6)	 Only if necessary.	AR35.20-L-0130-05VA
			*168589081500
			*202589044300
8	Install in the reverse order

 Rear axle shaft

Number	Designation		Model 414


BA35.30-P-1002-01B	Collared nut, rear axle shaft flange to trailing arm	Nm	190

116 589 22 33 00

Extraction tool

Removal and installation tool

Drift

168 589 08 15 00

202 589 04 43 00

ap4010p4050z Remove/install wheels, rotate if necessary
ar3520l013005va Pressing in and pressing out angular ball bearing on rear axle shaft flange
ar4210l0240va Remove/install rear axle brake disc