B32.20-0131-09
1 | Triangular bar | 5 | Spring lower bracket | |
2 | Longitudinal tension arm | 6 | Nut | |
3 | Nut | 7 | Bolt | |
4 | Bolt | A | Label |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
| Remove/install | ||
1 | Park the vehicle in a flat surface, stop the engine, and apply the parking brake | Chock the front wheels to prevent the unexpected moving of the vehicle. | |
2 | Lift the rear axle and support the chassis with proper stands | ||
3 | Place the jack under the rear axle | ||
4 | Remove the bolts (4) and the nuts (3) of the bracket between the axles, bellow the suspension stop | .Longitudinal arm screws | |
5 | Remove the nuts (6) and the bolts (7) at the spring lower bracket (5), in each axle | .Longitudinal arm screws | |
6 | Remove the longitudinal tension arm (2) of the vehicle | ||
| Check | ||
7 | Check the conservation conditions of the longitudinal tension arm | When the longitudinal tension arm presents signs of out-of-roundness in the housings, corrosion and wear: | |
| |||
Replace the longitudinal tensioner arm. | |||
8 | Install in reverse order |
Referenced documents
- ah0060n010001b Special instructions for lifting and supporting vehicle
- as0000z003201a Risk of death caused by vehicle slipping or toppling off during lifting