Remove/install complete rear axle · ar3510w0010f · Mercedes-Benz WIS

AR35.10-W-0010F

Remove/install complete rear axle

7.5.10

REAR AXLE 770.0, 771.0 /10 with CODE (ID1) Leaf suspension

W35.10-1006-09

Shown on rear axle of model designation 770 with disk brake

1 Spring U-bolt

2 Spring seat

3 Rear axle spring

4 Spring support

5 Vent line

6 ALB linkage

13 Nut (propeller shaft)

14 Shock absorber

15 Nut (shock absorber)

16 Stabilizer

17 Compressed air line (differential lock)

18 Plug (differential lock)

7 Brake lines

8 Nuts (spring bracket)

9 Plug connection

10 Plug (brake wear sensor)

11 Connector (temperature sensor)

12 Propeller shaft

Modification notes

4.12.06

Work procedure changed.

 	Remove/install
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Remove wheels		AR40.10-W-1100A
2	Support vehicle on its frame
4	Remove ABS sensor		AR42.30-W-0150A
5	Detach the connector (9)	 On the version without connector (9), detach the connector (10) directly from the brake wear sensor.
6	Detach connectors (11, 18)
7	Detach brake lines (7) and compressed air line (17)	With compressed air connection system "VOSS 230".	AR42.10-W-0900A
		With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
	Notes on compressed air connection systems		AH00.18-N-0001-01A
8	Unplug vent line (5) from axle housing
9	Detach ALB linkage (6)
10	Remove propeller shaft (12) at rear axle flange	 Support propeller shaft (12).	AR41.10-W-0050A
11	Support rear axle
12	Detach both shock absorbers (14) from the bearing brackets on the rear axle		*BA32.25-N-1001-03H
13	Remove spring bracket (1), spring seat (2) and spring pad (4)	 Place stabilizer bar (16) down.
			*BA32.20-N-1001-03G
14	Lower rear axle and take out under the vehicle	 Installation: Grease the mounting hole of the center bolts lightly. Raise rear axle so that the heart bolts are inserted into the mounting holes.	*BR00.45-Z-1020-06A
15	Install in the reverse order

 Rear axle steel suspension

Number	Designation			Model 375.1 with rear axle 770.0, 771.1	Model 970, 972, 975, 976 with rear axle RA 770.0, 771.0/1, Model 974 with RA 771.0/1


BA32.20-N-1001-03G	Nut to rear axle spring clamp	M161.5	Nm	200	200
		M181.5	Nm	350	350
		M242	Nm	750	750

 Rear axle shock absorber

Number	Designation			Model 374.4, 375.1, 958.0, 970, 972, 974, 975, 976


BA32.25-N-1001-03H	Nut of shock absorber to bearing bracket	M141.5	Nm	150
		M161.5	Nm	170
		M201.5	Nm	350

Repair materials

Number	Designation	Order number
BR00.45-Z-1020-06A	Leaf-spring grease (refer to Specifications for Operating Fluids, Sheet no. 268)	-