ar3510p0010mp

Removing and installing complete rear axle

Type ar · topic 35.10 · version 0101 · 2005-12-20

Applies to: MODEL 220.875/ 878

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.10 Complete rear axle — Series 220 (models 875, 878)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.30 Rear axle assembly — Series 220 (models 875, 878)

AR35.10-P-0010MP

Removing and installing complete rear axle

7.12.05

MODEL 220.875/ 878

Removing and installing complete rear axle

P35.10-2175-09

Fig. item etc.

Work instructions

The removal of the rear axle corresponds to production vehicles except for the modifications listed below.

See:

Removing and installing complete rear axle

AR35.10-P-0010I

1 C

front rear-axle mount

Installation: Note position of shims on front rear-axle mounts.

Arrow

Stop plate

Install components in correct positions.

1

Rear axle

Use pit lift or floor jack under rear-axle center assembly for support.

The assembly adapter specified for production vehicles must not be used.

Check vehicle level at front and rear axle with electronic inclination meter and adjust, if necessary

AR40.20-P-0301I

Referenced documents