Remove/install complete rear axle · ar3510i0010b · Mercedes-Benz WIS

AR35.10-I-0010B

Remove/install complete rear axle

24.4.07

REAR AXLE 746.681 in MODEL 684.482

I35.10-0005-09

1 Propeller shaft

2 Bolt

3 Nut

4 Nut

5 Spring U-bolt

6 Spring seat

7 Shuttle valve

8 Bolt

9 leaf spring

10 ABS sensor connector

11 Vent line

12 Shock absorber

13 Nut

 	Remove/install
1	Remove rear wheels		AR40.10-I-1100B
2	Detach propeller shaft from rear axle (1)		AR41.10-I-0050B
3	Detach vent line (11) from rear axle housing
4	Disconnect ABS sensor connectors (10) and expose lines
5	Detach shuttle valve (7) and tie up to one side	 Do not detach compressed air lines.
6	Remove combination cylinders and tie up to one side	 Do not detach compressed air lines.	AR42.10-I-0700B
7	Detach dampers (12) on the rear axle		AR32.25-I-0110B
8	Support rear axle and secure to prevent it from falling down	 Use vehicle jack or pit lift.
9	Detach spring brackets (5) and remove spring seats (6)	 Replace self-locking nuts (4).
			*BA32.20-N-1001-03I
10	Lower rear axle and pull out below vehicle
11	Install in the reverse order

 Rear axle steel suspension