Remove/install complete rear axle

AR35.10-B-0010TG

Remove/install complete rear axle

12.02.16



Remove and install



Instructions regarding screws and self-locking screws

AH00.00-B-0001-01A

1

Remove the wheels

AR40.10-B-1100D

2

Support the vehicle by the chassis

3

Remove the ABS sensor

AR42.30-B-0150TA

4

Remove the compressed air pipes (6) from the combined cylinders

With compressed air connection system "VOSS 230".

AR42.10-B-0900TA

With compressed air connection system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).

AR42.10-B-0900TC

Install: check O-Rings, replace if needed.



Indications on compressed air connection systems

AH00.18-B-0001-01A

5

Remove the connection (8) to the sensor cable of the brake wear sensors

 In sensor cables without connector (9), remove directly on the brake wear sensor.

6

Remove the connector (14) and the compressed air pipe (10) from the differential lock

7

Remove the connector (15) from the rear axle temperature sensor

 Only in vehicles with maintenance system (WS).

8

Remove the vent pipe (5) from the axle bridge

9

Remove the ALB rod (7)

10

Remove the compressed air distributor from the axle bridge

 Do not disconnect the pipes.

11

Remove, from the axle bridge, the cables and harnesses fixed and tie aside with the compressed air distributor

12

Remove the stabilizer bar

AR32.35-B-2210TE

13

Remove the shock absorber

AR32.25-B-0110TA

14

Remove the drive shaft only in the rear axle drive flange

 Protect the driveshaft against fall.

AR41.10-B-0050TA

15

Lift the rear axle until the leaf springs (3) are loosened and protect the axle against fall

 Use car lift or jack lift.

16

Remove the spring clamps (1), arm stand support (12) and right and left spring seat (2)

Install: replace the self-locking nuts (13).



*BA32.20-B-1001-03H

17

Release the rear axle and remove the spring seat (4) of the axle bridge

 Install: lightly grease the housing of the king pins on the spring seats (4). When lifting the axle, watch out for that the center pins fit into their respective housings.

*BR00.45-B-1020-06A

18

Lower the rear axle and remove it from under the vehicle

19

Install in reverse order

Número

Denominação

Chassis 934.241/251, 958.2, 958.4 with rear axle 740.8, 746.209/210/213, 746.230/233, 746.305/231, 748.590/594

BA32.20-B-1001-03H

Spring pack "U" bolt nut

M20

Nm

500

M24

Nm

750

M27

Nm

900

Número

Denominação

Número de pedido

BR00.45-B-1020-06A

Grease as per DBL 6806.00

A 001 989 23 51