| Remove/install | ||
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
1 | Let the vehicle rest on the chassis | ||
2 | Remove the wheels |
| |
Topical note | Notes on self-locking nuts and bolts | ||
3 | Drain the oil from the 2nd rear axle | ||
| Rear axle - oil change | . | |
4 | Remove the electric and pneumatic connectors | ||
Notes on compressed air connection systems | |||
5 | Remove the dampers | ||
6 | Remove the wishbone control arms screws (1, 2, 3 and 4) and remove the wishbone control arms | ||
7 | Remove the wishbone control arm. | ||
8 | Remove the springs | ||
9 | Remove the bolt securing propeller shaft bypass to 2nd rear axle input (9) | ||
10 | Remove the bolt securing the 2nd rear axle stand (6) and remove the 2nd rear axle | Support the 2nd rear axle with a hydraulic jack. | |
11 | Remove the bolt securing propeller shaft bypass to 1st rear axle output (8) | ||
12 | Drain the oil from the 1st rear axle | ||
13 | Remove the bolt securing propeller shaft bypass to 1st rear axle input (10) | ||
14 | Remove the bolt securing the 1st rear axle stand (6) and remove the 1st rear axle | Support the 1st rear axle with a hydraulic jack. | |
15 | Installation in reverse order |
Referenced documents
- ah0000n000101a Notes on self-locking nuts and bolts
- ah0018n000101a Notes on compressed air connection systems
- ap3500b3501d Rear axle - oil change
- ar4010b1100d Remove/install wheels
- as0000z003201a Risk of death caused by vehicle slipping or toppling off during lifting