AR35.10-B-0010N | Remove/install complete rear axle | 12.02.16 |
Rear axle 743.480 with Vehicle 979.013, 979.016
B35.10-0012-09
1 Shock absorber
2 Vent hose
3 Hydraulic tube
4 Wear indicator
5 Flexible hydraulic pipe
6 Transmission shaft
7 Screw
8 Parking brake cable
9 Screw
10 ALB valve stem
11 Hydraulic connection
12 Nut
13 Rod
14 Top guide plate
15 Nut
| Remove and install | ||
1 | Remove rear wheels. | ||
2 | Drain the oil from the rear axle casing | ||
| |||
3 | Slacken the clamp and remove the vent hose (2) on axle side | ||
4 | Remove the brake pads wear indicator (4) | ||
5 | Remove the bolt (9) attaching the ALB valve stem (10) | ||
Danger! | Risk of poisoning by swallowing brake fluid.Risk of injuries by eye contact or splashes of brake fluid | Only store brake fluid in appropriate containers. Wear protective clothes and safety goggles. | |
6 | Remove the hydraulic brake pipe (3) | Plug the hydraulic pipe outlet to prevent clogging. | |
Installing: Purge the air from the brake system. | |||
7 | Remove the flexible hydraulic brake pipe (5) | ||
8 | Remove the hydraulic connection (11) from the bracket | ||
9 | Loosen the parking brake cable (8) | ||
10 | Remove the shock absorbers (1) | Check the condition of the rubber bushings of the shock absorbers and the stabilizing bar. Installing: Install new self-locking nuts. | |
| |||
11 | Remove the nut (15) attaching the stabilizer bar | | |
12 | Remove the bolts (7) attaching the transmission shaft (6) and secure it to the chassis | Mark beforehand the original position between the transmission shaft and the axle to maintain the balance. | |
| |||
13 | Insert an appropriate elevation device under the rear axle and lift it | Do not suspend the vehicle by the differential housing. | |
14 | Remove the nuts (12), the spring pack "U" bolts (13) and the top guide plates (14). | Installing: Realign the "U" bolt threads with a thread chaser and lubricate. | |
| |||
15 | Lower the axle and remove it | ||
16 | Install in reverse order |
Rear axle steel suspension
Rear axle stabilizer bar
Número | Denominação | Chassis 979.01; 979.04 | |||
BA32.35-B-1001-03D | Rod/shackler in the support | M12x1.5 | Nm | 92 | |
Rear axle shock absorber
Número | Denominação | Vehicles 979.01/02/04, 979.07 | |||
BA32.25-B-1002-03C | Shock absorbers at the rear axle | M16x1.5 | Nm | 210 | |
Propeller shaft
Referenced documents
- ap3500b3501f Rear axle - oil change
- ar4010b1100e Remove/install wheels
- as4250b000101a Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid