ar3330p0010msc

Check oil level in front axle differential, correct if necessary

Type ar · topic 33.30 · version 0100 · 2020-05-18

Applies to: Model 167

Where it sits

Function group 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — Series 167

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.65 Front axle differential/axle through drive — Series 167

AR33.30-P-0010MSC

Check oil level in front axle differential, correct if necessary

13.05.2020

Model

167

Check oil level in front axle differential, correct if necessary

1

Front axle transmission

3

Filling screw

P33.30-A021-05

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Remove

1

Remove lower center engine compartment lining.

AR61.20-P-1105ME

2

Clean area around filling screw (3).

Loctite 7063 (400 ml) cleaning spray

*BR00.45-Z-1046-04A

3

Remove filling screw (3).

Check

4

Check oil level and correct, if necessary.

If the oil level is correct, the hypoid gear oil reaches up to the lower edge of the filling screw's threaded hole (3).

If the oil level is too low,

add the hypoid gear oil using the hand pump until the hypoid gear oil reaches up to the lower edge of the filling screw threaded hole (3).


BB00.40-P-0235A

Hand pump

*210589007100

Install

5

Coat first thread pitch of filling screw (3) with quick-acting adhesive.

Quick-acting adhesive Omnifit 100H (50 g)

*BR00.45-Z-1110-02A

6

Screw in filling screw (3).

Front axle transmission filling screw

*BA33.30-P-1002-03H

7

Check front axle differential(1) for leak tightness.

8

Install bottom center engine compartment lining.

AR61.20-P-1105ME

Front axle gear

Number

Designation

Model 167

BA33.30-P-1002-03H

Front axle transmission filling screw

Nm

35

Check oil level in front axle differential, correct if necessary

210 589 00 71 00

Hand pump

Repair materials

Number

Designation

Order number

BR00.45-Z-1046-04A

Loctite 7063 (400 ml) cleaning spray

A 001 986 71 71 09

BR00.45-Z-1110-02A

Quick-acting adhesive Omnifit 100H (50 g)

A 002 989 23 71

Referenced documents