Disassembling and assembling drive shaft · ar3330l0700a · Mercedes-Benz WIS

AR33.30-L-0700A

Disassembling and assembling drive shaft

7.8.97

FRONT AXLE 730.353 in MODEL 670.398

FRONT AXLE 730.354 in MODEL 670.4

N33.30-0340-06

1 Drive shaft piece, outer

2 Sealing ring

3 Needle bearing

4 Locking ring

5 Lubricating nipple, angled/outer

6 Lubricating nipple, straight/inner

7 Double-joint housing

8 Universal joint

9 Drive shaft piece, inner

 	Disassembling, assembling
1	Remove joint on drive shaft	 Installation: Replace universal joints (8), needle bearings (3) and sealing rings (2). Measure and replace locking rings (4). Lubricate needle bearings (3) thoroughly before installing.	AR33.30-L-0670-01A
			*343589003300
			*343589031500
			*321589001500
			*BE33.30-N-1001-04B
			*BF33.30-N-1001-04A
	Checking
2	Check drive shaft pieces (1, 9), double-joint housing (7), needle bearing inner race and lubricating nipples (5, 6) for wear and replace if necessary.
3	Assemble in reverse order.

Test values for drive shaft

Number	Designation			Front axles 730.353/354


BE33.30-N-1001-04B	Distance between needle bearing and joint fork at the drive shaft dimension "A"	Dimension "A"	mm	0.2-0.5
		See figure		AR33.30-L-0670-01A

 Drive shaft

Number	Designation			Front axles 730.353/354


BF33.30-N-1001-04A	Multi-purpose grease	Filling quantities for each drive shaft joint crosspiece	g	5
		Specifications for Service Products	Sheet

343 589 03 15 00

Drift punch

Extractor

343 589 00 33 00

321 589 00 15 00