ar3330b7635a

Remove/install front axle gear cover

Type ar · topic 33.30 · version 0100 · 2016-02-12

Applies to: Front axle 733 with Vehicle 384.145, 384.114

Where it sits

Function group 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — Series 384 (models 114, 145)

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.50 Housing/supporting tube/bridge/carrier/torque tube — Series 384 (models 114, 145)

Also applies to engines/gearboxes: 733 ***

AR33.30-B-7635A

Remove/install front axle gear cover

12.02.16

Front axle 733 with Vehicle 384.145, 384.114

Remove/install front axle gear cover

B33.30-0033-01

1 Screw

2 Differential cover

3 Gasket seal

4 Front axle housing

Remove

1

Remover the bolts (1)

2

Remove the differential cover (2) from the front axle housing (4)

Installing

3

Clean the seating surface of the seal gasket (3) on the differential cover (2) and on the front axle housing (4)

4

Install the differential cover (2) on the front axle housing (4) with a new seal gasket (3)

5

Mount screws (1) and tight them to the specified torque

Replace the bolts (1).

*BA33.25-B-1001-01B

Axle housing, steering knuckle

Número

Denominação

Front axle 733.0

BA33.25-B-1001-01B

Cover on the front axle housing

M10

Nm

45...50