AR33.30-B-0700A | Dismantle, assemble drive shaft. | 12.02.16 |
Front axle 733 with Vehicle 384.145, 384.114
B33.30-0041-06
1 Center screw
2 Cotter pin
3 Allen screw
4 Pivot pin
5 Sealing ring
6 Needle rollers
7 Notched crosshead
8 Bearing bracket
9 Needle rollers
10 Axle shaft - RH half
11 Sealing ring
12 Axle shaft - LH half
13 Bearing race
14 Nut
15 Retaining screw
16 Joint coupling
| Disassemble and assemble | ||
1 | Remove the axle shaft joint | Install: Change the needle rollers (6) (9), sealing rings (5) and cotter pins (2). Apply grease to the needle rollers before installing. | |
| |||
| Check | ||
2 | Check the axle shaft (10) (12), the notched crosshead (7), and the bearing brackets (8) for damage and wear and, if necessary, replace them | ||
3 | Assemble in reverse order |
Drive shaft
Número | Denominação | Front axle 733.0 | |||
BE33.30-B-1001-04A | Distance A for assembly of needle bearing inside race | mm | 0.2...0.5 | ||
Drive shaft
Número | Denominação | Axles 733.002, 733.009, 733.033, 733.036 | |||
BA33.30-B-1001-07A | Knurled head bolt on the slotted joint | M14 | Nm | 80 | |
BA33.30-B-1002-07A | Bolt attaching the bearing support | M12 | Nm | 105 | |
Input shaft
Número | Denominação | Axles 733.002, 733.009, 733.033, 733.036 | |||
BF33.30-B-1001-04A | Long-term grease | Quantity per cross-head | g | 5 | |
Service product - sheet | |||||
360 589 03 07 00
Toothed wrench
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1001-02A | Chemical lock | Loctite 241 |
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1003-06A | Grease as per DBL 6804 - Class 267.0 | - |
Referenced documents
- ar3330b067001a Removing and installing joint at input shaft