ar3330b045004a

Removing, installing locking plate on ring nut

Type ar · topic 33.30 · version 0100 · 2016-02-12

Applies to:

Where it sits

Function group 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — Series 384 (models 114, 145)

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.65 Front axle differential/axle through drive — Series 384 (models 114, 145)

Also applies to engines/gearboxes: 733 ***

AR33.30-B-0450-04A

Removing, installing locking plate on ring nut

Axle drive

Número

Denominação

733.0 axles

BA33.30-B-1003-08A

Bolt fastening the retaining plate of the drive pinion

M8

Nm

25

Removing, installing locking plate on ring nut

B33.30-0045-01

Remove

1 Release the bolt.

2 Remove the lock plate.
Check the lock plate and, if necessary, replace it.

Install

3 Assemble the locking plate.
Install the lock plate only after checking the pinion basic measurement.

4 Install the bolt and tighten it with the specified moment of power.