ar3320p044002d

Pressing out and installing supporting joint at lower wishbone

Type ar · topic 33.20 · version 0102 · 1999-11-08

Applies to: MODEL 210.08 /28

Where it sits

Function group 2 Chassis › 33 Front axle › 33.20 Wheel location, wheel hubs — Series 210 (models 08*, 28*)

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.41 Transverse control arm/control arm/stabilizer bar — Series 210 (models 08*, 28*)

AR33.20-P-0440-02D

Pressing out and installing supporting joint at lower wishbone

Replace self-locking nut

Wheel location system, hub

Number

Designation

Models 210.08/28

BA33.20-P-1006-01A

Self-locking nut for supporting joint on lower wishbone

Nm

105

Pressing out and installing supporting joint at lower wishbone

Puller

140 589 00 33 00

Pressing out and installing supporting joint at lower wishbone

P33.20-0366-01

Pressing out

1 Unscrew self-locking nut from supporting joint (7).

2 Using puller (046), press supporting joint (7) out of lower wishbone.

3 Remove puller.

Installation

4 Clean tapered connection.

5 Replace and tighten self-locking nut.

Shown with lower wishbone installed