Remove/install front axle · ar3310b0100tf · Mercedes-Benz WIS

AR33.10-B-0100TF

Remove/install front axle

12.02.16

Front axle 733.0, 733.89 with Vehicle 958.0, 958.1

W33.10-1006-06

1 Stabilizer

2 Shock absorber

3 Spring pack "U" bolt

4 Top spring stop

5 Compressed air line

6 ABS sensor

7 Bottom spring stop

8 Transmission shaft

9 Nut

10 Nut

11 Connector

12 Compressed air line

13 Vent pipe

	Remove and install
	Indications on self-locking nuts and bolts		AH00.00-B-0001-01A
1	Remove the wheels		AR40.10-B-1100D
2	Support the vehicle on the frame
3	Remove the steering rod	Carry out only in steering 765.83/84/86.	AR46.40-B-0100TA
4	Remove the ABS sensor (6)
5	Detach the compressed air lines (5) on the brake cylinders	With connection system by compressed air "VOSS 230".	AR42.10-B-0900TA
		With connection system by compressed air "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-B-0900TC
		 Installing: Check the O-Rings. If necessary, replace.
	Indications on connection systems by compressed air		AH00.18-B-0001-01A
6	Remove the front axle shock absorbers (2)		*BA32.25-B-1001-01C
7	Remove the differential lock compressed air line (12) and lift out the connector (11)
8	Remove the vent pipe (13)
9	Detach the transmission shaft (8), only at the front axle	 Support the transmission shaft	AR41.10-B-0050TA
10	Provide for that the front axle does not drop.
11	Remove the spring pack "U" bolt (3), the top stop (4) and bottom stop (7) of the spring	 Bring down the stabilizer (1).
			*BA32.20-B-1001-01E
12	Lower the front axle and pull it out from underneath the vehicle
13	Install in reverse order
14	Check the wheel stop, if necessary		AR33.25-B-0150TA

Front axle steel springs

Front axle shock absorber

Número	Denominação		Chassis 958.0, 958.1


BA32.25-B-1001-01C	Shock absorber nut on front axle	Nm	150