ar3250p0010lf

Remove/install front suspension pressure reservoir

Type ar · topic 32.50 · version 0102 · 2019-02-14

Applies to: Model 217, 222 with code 487 (Active Body Control (ABC))

Where it sits

Function group 2 Chassis › 32 Suspension › 32.50 Active Body Control (ABC), electrohydraulic suspension — Series 217 · Series 222

EinPAS 20 Chassis › 20.16 Suspension › 20.16.31 Pressure generation/container/control block — Series 217 · Series 222

AR32.50-P-0010LF

Remove/install front suspension pressure reservoir

30.01.2019

Model

217, 222

with code 487 (Active Body Control (ABC))

Remove/install front suspension pressure reservoir

1

Pressure reservoir

2

Bracket

Y36/1

ABC front axle valve unit

P32.50-2386-05

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Topical note

Notes on fitting hydraulic lines and hoses

AH32.50-P-0001-02A

Notes on Active Body Control suspension

AH32.50-P-0001-01N

Remove/install

1

Release pressure in ABC system using diagnostic system

AR32.50-P-0001-01LF

AD00.00-P-2000-04B

2

Remove front axle ABC valve unit (Y36/1) with pressure reservoir (1)

AR32.50-P-0001LF

3

Detach bracket (2) from front axle ABC valve unit (Y36/1)

Bolt, bracket to front valve unit

*BA32.50-P-1002-03B

4

Clamp front axle ABC valve unit (Y36/1) with pressure reservoir (1) in vise

Use soft vise jaws.

Clean

5

Clean area around connecting point of pressure reservoir (1) to front axle ABC valve unit (Y36/1)

Only use clean, lint free rags and cleaner free of mineral oil.

6

Unscrew pressure reservoir (1) from front axle ABC valve unit (Y36/1)

Pressure reservoir at front valve unit

*BA32.50-P-1005-03B

7

Dispose of pressure reservoir (1) properly

When replacing pressure reservoir (1)

8

Install in the reverse order

9

Fill and bleed ABC system

AR32.50-P-0021SX

Active Body Control

Number

Designation

Model 217

Model 222

BA32.50-P-1002-03B

Bolt, bracket to front valve unit

M6

Nm

10

10

Active Body Control

Number

Designation

Model 217

Model 222

BA32.50-P-1005-03B

Pressure reservoir at front valve unit

Nm

80

80

Referenced documents