Remove/install front anti-roll bar · ar3235p2050ff · Mercedes-Benz WIS

AR32.35-P-2050FF

Remove/install front anti-roll bar

9.6.06

MODEL 454.0

P32.25-2180-06

Shown on engine 639.9

1 Stabilizer

2 Link rod

3 Bolts

4 Clip

5 Rubber bushing

6 Front axle carrier

7 Rack-and-pinion steering

Modification notes

10.3.06

Bolt, retaining clamp to torsion bar

Model 454.0

 	Remove/install
1	Disassemble rack-and-pinion steering (7) on front axle carrier (6) until the bolts (3) of the clamps (4) are accessible	 Do not take off rack-and-pinion steering (7).	AR46.20-P-0600FF
2	Remove link rods (2) on stabilizer bar (1)	Engine 122.9	AR32.35-P-2050-05FB
			*BA32.20-P-1002-01K
		Engine 134.9, 135.9, 639.9	AR32.35-P-2050-05FF
			*BA32.20-P-1002-01K
3	Remove bolts (3)		*BA32.20-P-1001-01K
4	Take off clamps (4) and rubber bushing (5)	 Installation: Note the installation position of the rubber bushings (5).
5	Take off stabilizer bar (1) from front axle carrier (6)
6	Install in the reverse order

 Front axle stabilizer bar

Number	Designation		Model 454.0


BA32.20-P-1001-01K	Bolt, retaining clamp to torsion bar	Nm	35
BA32.20-P-1002-01K	Nut, link rod to stabilizer bar	Nm	28