AR32.33-W-0002A | Parameterizing model for starting-off aid | 7.11.97 |
MODEL 950.20 /21
with CODE (E07) starting-off aid without time limit
except CODE (CD9) roll control (WR)
W32.33-0139-01
Sticker, ELA control module
HHT mask, "parameterizing"
01 Vehicle model:
6x2
02 Front axle with
air suspension: YES
03 Starting-off aid model:
Nordic countries
ENR
Parameterizing 1/13
F2
F1
F4
F3
<
?
Parameterizing | |||
1 | Connect HHT with commercial vehicle test module to diagnostic socket X13 | Hand-Held-Tester (HHT) | |
Test cable (Multiplexer) | |||
Adapter cable for 14-pin diagnostic socket | |||
HHT operating instructions | |||
Case | |||
Commercial vehicle test module | |||
2 | Select ACTROS menu and perform short test | ||
3 | Select ELA control module in HHT | The HHT now initiates the dialog with the ELA control module | |
4 | In ELA functions menu, select Parameterizing number 5 | ||
5 | IN ELA parameterizing menu, select Starting-off aid model number 03 | In ELA selection menu, select Starting-off aid model number 3 "Nordic countries". | |
6 | Enter new parameter on the sticker on ELA control module |
Commercially available tools
Number | Designation | |
WH58.30-Z-1036-13A | Handheld tester (HHT) | 651 100 01 99 |
WH58.30-Z-1037-13A | Test cable (multiplexer) | 651 100 40 99 |
WH58.30-Z-1039-13A | Adapter cable for 14-pin diagnostic socket | 651 101 40 99 |
WH58.30-Z-1040-13A | HHT operating instructions | 651 100 21 00 |
WH58.30-Z-1041-13A | Case | 651 101 60 99 |
WH58.30-Z-1042-13A | Commercial vehicle test module | 651 156 00 00 |