Remove/install level sensor operating lever · ar3233s0010s · Mercedes-Benz WIS

AR32.33-S-0010S

Remove/install level sensor operating lever

9.12.09

MODEL 639.601 /603 /605 /701 /703 /705 /711 /713 /811 /813 /815 with CODE (CL0) Rear air suspension, lowerable and liftable

N32.33-2031-06

Illustrated on right side of vehicle

1 Operating lever nut

2 Transfer lever

3 Actuating lever

4 Semi-trailing arm

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Switch electronic level control to passive mode	 See Operator's Manual
2	Detach operating lever nut (1) on transfer lever (2)	 Installation: Replace self-locking nut.
			*BA32.22-N-1007-03F
		 Torque wrench	*001589752100
3	Detach operating lever (3) from semi-trailing arm (4)	 Remove ball head (arrow) with operating lever (3).
			*BA32.22-N-1008-03F
		 Torque wrench	*001589752100
4	Install in the reverse order

 Air suspension

Number	Designation		Model 639 with code CL0


BA32.22-N-1007-03F	Nut, operating lever on level sensor transfer lever	Nm	8
BA32.22-N-1008-03F	Ball head, link rod of turning angle sensor to transverse control arm	Nm	8

Torque wrench

001 589 75 21 00

ah0000n000101a Notes on self-locking nuts and bolts
as0000z001001a Risk of death caused by vehicle slipping or toppling off of the lifting platform.