ar3232p0680a

Remove/install rear damping valves

Type ar · topic 32.32 · version 0108 · 2009-01-27

Applies to: MODEL 140 as of 1.6.94, 210 with CODE (217) Level control on rear axle with ADS

Where it sits

Function group 2 Chassis › 32 Suspension › 32.32 Level control with adaptive damping system (ADS) — Series 140 · Series 210

EinPAS 20 Chassis › 20.16 Suspension › 20.16.13 Line/hose/valve — Series 140 · Series 210

AR32.32-P-0680A

Remove/install rear damping valves

20.1.09

MODEL 140 as of 1.6.94,
210 with CODE (217) Level control on rear axle with ADS

Remove/install rear damping valves

P32.32-0213-06

Type 140

Remove/install rear damping valves

P32.32-0235-06

Model 210

Picture shows location on model 210.0

Figure item, etc.

Work instructions

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Installation

Replace self-locking nuts and bolts.

Emptying and filling pressurized oil system

AR32.30-P-0630A

P4

Pressure lines

Disconnect at damping valves (Y53, Y54).

*BA32.32-P-1001-02A

Y53, Y54

Damping valve

Detach at bracket, disconnect electrical connector.

*BA32.32-P-1002-02A

*BA32.32-P-1003-02A

*BA32.32-P-1004-02A

Rear axle damping valve

Number

Designation

Model 140 with ADS as of 1.6.94

Model 210 with ADS

BA32.32-P-1001-02A

ADS pressure line to damping valve (guide value)

M161.5

Nm

30

30

M181.5

Nm

44

44

BA32.32-P-1002-02A

Self-locking nut, left damping valve to bracket

M8

Nm

24

-

BA32.32-P-1003-02A

Self-locking nut, right damping valve to bracket

M8

Nm

14

14

BA32.32-P-1004-02A

Self-locking nut, left damping valve to bracket

M8

Nm

-

14

Referenced documents