P32.20-0207-09
| Removal, installation | ||
| Replace self-locking bolts and nuts. | ||
1.1 | Remove control rod (54) on intermediate linkage (10a). | Model 129 with adaptive damping system (ADS) with level control, code 216. | |
Nut (54a) | |||
2 | Unscrew bracket (22b) on wishbone (31). | Nut (22f) | |
3 | Remove bracket (21b). | Nut (21f) | |
4 | Remove spring leaf swivelling lever (21) and mounting plate (21c). | Bolt (21d) | |
5 | Remove torsion bar (10) through the side of the engine compartment cover. | Installation: Align torsion bar (10). | |
6 | Pull rubber mounts (21a, 22a) off torsion bar. | ||
7.1 | Remove intermediate linkage (10a) from torsion bar (10). | Model 129 with adaptive damping system (ADS) with level control, code 216. Installation: Slide bush (10d) with hexagon side forwards onto the torsion bar. Slide intermediate linkage (10a) onto the torsion bar (10) so that the two faces align (arrow). | |
Bolt (10c) | |||
8 | Install in reverse sequence |
Front axle torsion bar
Number | Designation | Model 129 | Model 129 with ADS | |
BA32.20-P-1001-02A | Self-locking nut for fastening bracket to wishbone | Nm | 20 | 20 |
BA32.20-P-1002-02A | Self-locking nut for fastening bracket to spring leaf swivelling lever | Nm | 20 | 20 |
BA32.20-P-1003-02A | Self-locking bolt for fastening spring leaf swivelling lever to side member | Nm | 60 | 60 |
BA32.20-P-1004-02A | Self-locking bolt for fastening the clamping collar of intermediate linkage to torsion bar | Nm | - | 10 |
BA32.20-P-1005-02A | Self-locking nut for fastening control rod to intermediate linkage | Nm | - | 10 |