ar3220l0350va

Remove/install rubber bushing on front torsion bar

Type ar · topic 32.20 · version 0203 · 2004-07-08

Applies to: MODEL 414.700

Where it sits

Function group 2 Chassis › 32 Suspension › 32.20 Steel springs, torsion bars, Niveaumat — Series 414 (models 700)

EinPAS 20 Chassis › 20.16 Suspension › 20.16.30 Spring/air suspension bellows/shock absorber/suspension strut — Series 414 (models 700)

AR32.20-L-0350VA

Remove/install rubber bushing on front torsion bar

14.3.01

MODEL 414.700

Remove/install rubber bushing on front torsion bar

L32.20-0016-11

1 Front torsion bar

2 Bolt

3 Bracket

4 Rubber bushing

5 Link rod

6 Nut

7 Nut

8 Suspension strut

9 Front axle carrier

 	Remove/Install
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
1	Remove front wheels	 Provides easier access.
	Remove/install wheels, rotate if necessary		AP40.10-P-4050Z
2	Remove nut (6) holding link rod (5) to front torsion bar (1) and nut (7) holding link rod (5) to suspension strut (8) and remove link rod (5).	 Installation: Do not twist or damage rubber boot. The ingress of dirt could damage the ball joint.  The link rods (5) with M10 thread must be replaced with new rods after each disassembly. Counter the ball head bolts on the link rods (5). Check link rods (5) with M12 thread and replace if necessary.
			*BA32.20-P-1004-02F
			*BA32.20-P-1005-02F
3	Remove bolts (2) and detach bracket (3) from front axle carrier (9).		*BA32.20-P-1001-02F
4	Pull rubber bushing (4) off front torsion bar (1).	 Installation: Do not use grease or sliding compound.
5	Install in the reverse order

 Front axle torsion bar

Number	Designation				Model 414


BA32.20-P-1001-02F	Bolt, torsion bar to front axle carrier			Nm	28
BA32.20-P-1004-02F	Self-locking nut, link rod to torsion bar	M10	1st stage	Nm	40
			2nd stage Slacken	Nm	- 40
			3rd stage	Nm	30
			4th stage	°	35
		M12		Nm	90
BA32.20-P-1005-02F	Self-locking nut, link rod to suspension strut	M10	1st stage	Nm	40
			2nd stage Slacken	Nm	- 40
			3rd stage	Nm	30
			4th stage	°	35
		M12		Nm	90

Referenced documents

ah0000n000101a Notes on self-locking nuts and bolts
ap4010p4050z Remove/install wheels, rotate if necessary